Everest Trade - Concrete Dustproofer / Floor Primer & Sealer - Solvent Free

BENEFITS AND KEY FEATURES

• Effective concrete dustproofing
• Durable concrete sealer
• Low odour and solvent-free
• Will not blister or peel, hardens & seals concrete
• Gives additional protection to concrete surfaces
• Resists oil and stain penetration
• Easy to apply with a roller or sprayer

PRODUCT DESCRIPTION
Everest Trade Paints - Concrete Dustproofer is a solvent-free, quick-drying concrete sealer with a low viscosity formula which provides a highly effective coating to prevent dust formation on new and existing concrete floors while providing low downtimes and low odour application.

Solvent FREE concrete dustproofer that helps prevent dusting on porous concrete surfaces. It's frequently used to seal and prevent dust on concrete on garage floors and industrial floors.

Easy to apply by a roller or sprayer, gives additional protection to concrete surfaces.

Ideal for use as an undercoat prior to application of Everest Quick Drying Floor Paints on bare concrete floors in industrial, commercial and domestic areas due to its ability to penetrate deeper into the substrate providing a better surface to for the floor paint to adhere to and reducing the risk of delamination.

This product SHOULD BE USED as the primer and sealer for all our quick-drying floor paints for both internal and external applications.

However, if you're just planning on using this as a sealer without the intention of applying a topcoat we would recommend the Everest Trade Paints Polyurethane Concrete Sealer instead due to its highly durable base type or Everest Trade Paints Ultimate Concrete Sealer if you require a quick-drying, extra durable coating.

USES AND SURFACE COMPATIBILITY
Suitable for use as an undercoat for Floor paint on internal and external concrete floors and also a durable concrete sealer.
 
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
 
SPREADING RATE

• First coat:                Approximately 5 square meters per litre.
• Second coat:           Approximately 7 square meters per litre.

This is a rough estimate and varies depending on the condition of the driveway/floor and amount applied with each coat.
 
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Do not drive on the surface for 24 hours after the last coat.
 
APPLICATION
Brush, Roller, or Sprayer.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.

Apply only one coat if being used as a primer prior to application of our floor paint, 2 if being used solely as a sealer/dustproofer.

 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent sealer hardening. Store away from frost.
 
THINNERS
Thinners aren't required with this product, warm soapy water can be used for cleanup.
 
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease.

If applying on exterior surfaces, please ensure no rain is forecast and the surface is dry before application.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.

Components:	1 Part - Single Pack.
Base Type:	Premium Acrylic Resin.
Finish:	Satin Finish. Finish.
Theoretical Coverage:	Approximately 5 - 7 square metres per litre, per coat.
Number of Coats:	When priming prior to painting, 1 coat. If using as a standalone sealer, 2 coats..
Coating Thickness:	50 Microns..
Suitable Substrates:	Concrete Floors, Concrete, Concrete Flags/Slabs, Cement, and Most porous surfaces..
Use Case (Interior / Exterior):	Internal and External..
Touch Dry Time:	2 - 4 Hours at 18°C
Overcoatable:	2 - 4 Hours at 18°C..
Fully Cured:	.
Pot Life:	.
Primer Required?:	.
Colour Variation Count:	Colour(s) Available.
Application Method:	Brush, Roller, H.V.L.P Sprayer, Airless Sprayer, and Pump Sprayer..
Cleaner / Thinner:	Clean with soapy water.
Shelf Life:	24 Months if kept sealed and away from frost.
Sizes Available:	Available in Variants.

DATA SHEETS AND PRODUCT FILES

Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.

Coverage Calculator

This is our coverage calculator. Enter the size (m²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.