Everest Trade - HB Epoxy Factory Floor Paint - Industrial Grade - Two-Pack Epoxy Coating

BENEFITS AND KEY FEATURES

• Industrial grade, solvent and diluent free epoxy floor paint.
• Our most durable floor paint yet!
• Manufactured for use in factories, warehouses and industrial units.
• Long-lasting and highly durable.
• Based on a premium, 100% solids, high build epoxy resin.
• Anti-slip textured gloss finish (With anti-slip option).
• Up to 5x thicker than other floor paints!
• Premium, oil tolerant gloss finish.
• Excellent resistance to vehicles, especially forklifts.
• The surface is usable in just 24 hours after the last coat.

PRODUCT DESCRIPTION
A premium two-pack/two-part, highly durable epoxy resin-based floor paint, based on a high build-solvent free epoxy resin, ideal for use in industrial areas such as warehouses, factories and industrial units due to its high build, high durability formula.

Everest Trade - HB Epoxy Factory Floor Paint - Industrial Grade is 100% solids, unlike other, cheaper water-based and solvent-based epoxies. This results in no coating thickness loss during curing helping provide a thicker, more durable coating.

Everest Trade - HB Epoxy Factory Floor Paint can improve your factory floor in terms of both strength and appearance, providing a premium gloss finish and increasing overall durability in part due to the thickness of the product, which is up to 5x thicker than other paint systems on the market and overall mechanical strength as a result of the strength of the epoxy resin itself.

High durability against abrasion, scratches and impacts as well as mechanical wear such as forklifts, pallet track and other mechanical forces.

It provides a tough petrol and oil resistant finish with excellent durability while also providing great tyre pluck properties good for areas with forklifts and work vehicles.

Ideal for use in large factories, industrial units, garages and on workshop floors.

MADE IN ENGLAND WITH PREMIUM EPOXY RESINS. TO ISO 9001 STANDARDS, ENSURING QUALITY.

This item is always in stock for all order sizes, fast delivery on any amount, important if you have a large area to cover.

SUITABLE SUBSTRATES
Can be used on correctly prepared (see application tab above) concrete, metal and wood as well as most other porous substrates.
Power floated and polished floors must be ground using a floor grinder prior to application of this paint with the primer/sealer.

Not recommended for use on self-levelling floors as they tend to be non-porous.

COLOURS AVAILABLE
Red, Black, White, Dark Grey, Grey, Light Grey, Yellow and Green.

As well as any British standard or RAL colour for orders of 100kg and over.
Click here for a colour chart.

SPREADING RATE (Coverage)
A 5kg tin will cover approximately 17-20+ square meters per coat. Coverage rates vary depending on surface area and porosity.
Coverage is based on an application thickness of 400-500 microns for 2 coats.

Please note the above coverage rates are per coat, we always advise 2 coats.

DRYING/CURE TIME
We recommend you allow a minimum of 24 hours at 20°C prior to allowing foot traffic and 48 hours at 20°C prior to allowing vehicular traffic on the coated area(s). 7 days of curing at 20°C are advised prior to exposure to chemicals.

The minimum application temperature for this product is 7°C, Both surface and ambient temperature.

Under normal circumstances, this product will be:

Tack Free Time in approximately 8-12 hours (at 20°c)
Hard Dry Time in approximately 12-24 hours (at 20°c)
Full Chemical Resistance in approximately 7 days (at 20°c)

Temperatures below 20°C will slow curing times.

CHEMICAL RESISTANCE
This product exhibits excellent resistance to dilute acids, alkalis and oils. Suitable for most types of industrial spills.

STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening.
Keep away from frost.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.

DATA SHEETS AND PRODUCT FILES

Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.

Files and Data Sheets

MSDS - Material Safety Data Sheet

TDS - Technical Data Sheet

PAG - Product Application Guide

PCC - Product Colour Chart

Coverage Calculator

This is our coverage calculator. Enter the size (m²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.