Become a Stockist
JOIN OUR NETWORK - BECOME A STOCKIST FOR EVEREST PAINTS & SUMMIT SEAL Welcome to Everest Paints & Summit Seal Everest Paints and Summit Seal are at the forefront of...
Billyjoe Jarvis |
10% off across all of our products!
BLOCK PAVING SEALER - ECO-FRIENDLY AND SOLVENT FREE
BENEFITS AND KEY FEATURES
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
PRODUCT DESCRIPTION
Everest Trade Eco-Friendly & solvent-free block paving sealer is an eco-friendly block paving sealer based on premium acrylic resins. This sealer will provide a clear Satin finish seal coating to protect your driveway from fading, moss, lichen and weed formation. Its penetration comes about by evaporation, Penetrating into the blocks and sand binds the particles of sand and protects the paver face from oil and water infiltration. The sealer prevents moss and weed formation when applied correctly, joints should be re-sanded for optimum results.
100% UVA resistant, great resistance to tyre plucks and resists oil stains and water damage.
Maintains the performance life of the pavement. Yields significant whole-life cost savings and reduces interim maintenance.
USES AND SURFACE COMPATIBILITY
Suitable for use on block paving, brickwork and concrete.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 3 hours.
Do not drive on the surface for 24 hours after last coat.
APPLICATION
Brush, Roller, or Sprayer.
Sprayers will provide the best results due to the being less chance of interfering with the sanded joints.
Apply two coats thin coats at 5-6 square meters per litre to achieve the best results. Applying the coats in thin fully rolled-out coats will prevent any issues and speed up drying times.
To achieve a more enhanced finish on the blocks you can apply a third coat.
Rollers and brushes are fine for application, be careful when going over joints for best results.
The sealer needs to be applied to a bone-dry surface to ensure no issues with surface whiteness. The sealer needs to applied in thin even coats to ensure maximum durability and no issues with the coating.
We have compatible application tools on our website.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied. This is rare but can occur in times of increased demand due to the manufacturer running out of printed tins because of a large spike in sales. You can confirm this with the manufacturer.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Premium Acrylic Resin. |
Finish: |
Satin Finish. Finish. |
Theoretical Coverage: |
Approximately 5 - 6 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended.. |
Coating Thickness: |
50 Microns.. |
Suitable Substrates: |
Standard Block Paving, Concrete Block Paving, Concrete Flags/Slabs, Concrete, and Cement.. |
Use Case (Interior / Exterior): |
Internal and External.. |
Touch Dry Time: |
3 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C.. |
Fully Cured: |
. |
Pot Life: |
. |
Primer Required?: |
No primer required.. |
Colour Variation Count: |
Colour(s) Available. |
Application Method: |
Brush, Roller, H.V.L.P Sprayer, Airless Sprayer, and Pump Sprayer.. |
Cleaner / Thinner: |
Clean with soapy water. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in Variants. |
DATA SHEETS AND PRODUCT FILES
Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.
Files and Data Sheets
Coverage Calculator
This is our coverage calculator. Enter the size (m²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
Select Variant and Order
Excluding Tax
Ex Tax
Express Delivery Available!
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish - 20 Litre (4 x 5 Litre) is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.